Step 2- Configure SBC Device to connect to Live Platform

Before you can connect AudioCodes devices to Live Platform , you must configure the SNMP/HTTPS and WebSocket tunnel connection to Live Platform.

➢

To connect devices:

Configure SNMP on the device (Administration > SNMP > SNMP Community Settings).

Set parameter Disable SNMP to No.

Do one of the following:

Secure SNMP using SNMPv2 Community Read and Write strings (configure identical values as configured on Live Platform in Step 1- Add Device in Live Platform.

Configure SNMP using SNMPv3 user:

◆

User Name: Create relevant user name

◆

Authentication Protocol: SHA-1

◆

Privacy Protocol: AES-128

◆

Authentication Key: define and save to Notepad for configuration in Connecting Devices to Live Platform.

◆

Privacy Key: define and save to Notepad for configuration in Connecting Devices to Live Platform.

◆

Group: Read-Write

See SNMP Device Connection for details on SNMP connection.

Configure and upload incremental INI file that you received from AudioCodes to enable Web Socket tunnel connection to Live Platform (this step requires reboot):

Navigate to Setup > Administration > Maintenance > Auxiliary Files > INI file (incremental)

Browse to the file, Load, Save and Reboot device.

Open the Web Service Settings page (Setup menu > Web Services folder > Web Service Settings). Following device reset, the device is connected to Live Platform . Note that the parameter settings in the Incremental INI file are applied and that the public IP address of the Live Platform server is displayed.

Open the Time & Date page (Administration > Time & Date). Note that the NTP server is configured in the subnet of the Live Platform server.

Open the Quality of Experience Settings page (Setup > Signaling and Media > Quality of Experience Settings). Verify that the highlighted parameters are configured.

Open the Logging Settings page (Troubleshoot > Logging > Logging Settings). Verify that the 'Call Flow Report Mode' is enabled.